Joined
·
35 Posts
Hey guys, after reading a few posts on different installs I just completed my install of the Pioneer AVIC D3, it was relatively simple. I used the metra dash kit , which worked out pretty well. I still need to put the trim ring around the radio to complete the nice clean look.
I also installed Tview 9" headrest monitors, I wasn't to sure how the video would look, but it turned out pretty good. I did hook up the speed sensor wire which is white/red, I talked with someone from circuit city and he helped me locate it.
I know this install isnt near as detailed as some that I have read, but if you have any questions let me know and will do my best to answer them.
:cheers:
I also installed Tview 9" headrest monitors, I wasn't to sure how the video would look, but it turned out pretty good. I did hook up the speed sensor wire which is white/red, I talked with someone from circuit city and he helped me locate it.
I know this install isnt near as detailed as some that I have read, but if you have any questions let me know and will do my best to answer them.
:cheers:
Attachments
-
134.3 KB Views: 419
-
67.4 KB Views: 319
-
101.8 KB Views: 443
-
87.7 KB Views: 954
-
89.3 KB Views: 493