Joined
·
1,381 Posts
Alright guys I've been searching for a great way to mount our BDGT on A-pillars. Now I'm not wanting to be group leader bc I don't believe that I'll have time to try and mess with the testing, but I would like to be a part of the project and get us some custom A-pillars for our BDGTs!
Attention car clubs and Internet forum groups. We can manufacture custom gauge holders for your vehicle. Prices starting at just $20 for single pods. Full-length pillars as low as $39.
Minimum order quantity as low as 20 per project. Some models may require a higher minimum. All projects must be paid prior to project start. Pricing will be determined after receipt of OEM part for evaluation. Most of our products range from $40-$60 ea. depending on complexity.
REQUIREMENTS:
Name, address, and contact information of project leader. Follow-up will be with project leader only. (Please do not have others call for status)
OEM part from project leader. This will be used for fabricating the mold and is non-returnable.
Make, model and year range specifications.
Color samples (at least 4"x4" sample) of all colors to be painted.
Gauge Size requested (usually 2 1/16" and/or 60mm). Note: some models may not accomodate 60mm gauges due to width limitations.
PRODUCTION SCHEDULE:
Rough mock-up will be made and sent to project leader. Project leader test-fits mock-up - checking for clearance problems and angle of gauges. Project leader returns the mockup with any modifications and approves the design.
Mold-making process - approx 1-4 weeks
Initial production run - approx 3-4 weeks
Finishing and shipping - approx 1 week after product availability.
*******IMPORTANT********
PRODUCTION SCHEDULING IS COMPLEX AND DELAYS ARE NOT UNCOMMON DUE TO THE NUMBER OF PROJECTS AHEAD OF YOURS, MATERIAL LEAD-TIME, ETC. WE DO OUR BEST TO PROVIDE A RESONABLE ESTIMATE OF DELIVERY TIMES - HOWEVER, WE CANNOT GAURANTEE A DELIVERY DATE.
email: [email protected]
Attention car clubs and Internet forum groups. We can manufacture custom gauge holders for your vehicle. Prices starting at just $20 for single pods. Full-length pillars as low as $39.
Minimum order quantity as low as 20 per project. Some models may require a higher minimum. All projects must be paid prior to project start. Pricing will be determined after receipt of OEM part for evaluation. Most of our products range from $40-$60 ea. depending on complexity.
REQUIREMENTS:
Name, address, and contact information of project leader. Follow-up will be with project leader only. (Please do not have others call for status)
OEM part from project leader. This will be used for fabricating the mold and is non-returnable.
Make, model and year range specifications.
Color samples (at least 4"x4" sample) of all colors to be painted.
Gauge Size requested (usually 2 1/16" and/or 60mm). Note: some models may not accomodate 60mm gauges due to width limitations.
PRODUCTION SCHEDULE:
Rough mock-up will be made and sent to project leader. Project leader test-fits mock-up - checking for clearance problems and angle of gauges. Project leader returns the mockup with any modifications and approves the design.
Mold-making process - approx 1-4 weeks
Initial production run - approx 3-4 weeks
Finishing and shipping - approx 1 week after product availability.
*******IMPORTANT********
PRODUCTION SCHEDULING IS COMPLEX AND DELAYS ARE NOT UNCOMMON DUE TO THE NUMBER OF PROJECTS AHEAD OF YOURS, MATERIAL LEAD-TIME, ETC. WE DO OUR BEST TO PROVIDE A RESONABLE ESTIMATE OF DELIVERY TIMES - HOWEVER, WE CANNOT GAURANTEE A DELIVERY DATE.
email: [email protected]
