Looks good. Get some meaty 33x12.50's

 

I'm planning on 33s! Just nervous about rubbing..


Sent from AutoGuide.com Free App

 

They won't rub. 33's are stock for a pro4x and almost any Titan will clear them with less lift than you. I have 35's with a 2.5" spacer and minor fender liner trimming.

 

looks great!

 

looks sweet man, what kit is that and where did you get it?

Sent from AutoGuide.com Free App

 

It's the Rough Country 3" level. Just look up rough country lifts and you can order it on their website!


Sent from AutoGuide.com Free App

 

FWIW, I would piece the same kit together from eBay. You can get all the parts for cheaper if you do some shopping around. To the OP, did you get new cam bolts? You're gonna need them for a 100% proper alignment if you are newer than 05.5....

 

looks good man, big improvement.

 

Looks good man! Would look even better with those step bars in a dumpster somewhere. If you can live without em that is.

 

I did the RC 3" leveling kit in the front and a one inch block in the rear on 2012. I went with 295/70/18 nitto terra grapplers on stock wheels and they rub a bit. I haven't done the pinch weld mod yet.