Nissan Titan Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
5 Posts
Discussion Starter · #1 ·
I have an '08 Titan XE CC with BT, Trac Pakg and only 1.5 weeks old. A day or two after taking delivery, I noticed a squeaking noise when the engine was on in the engine compartment.. After opening the hood with the engine running I found the noise to be coming from the belt on the left side.

At first I thought this was condensation, or a new belt just needing to be broken in. But even after taking a 800 mile trip the noise is still there. You can't hear it while driving or from inside the cabin. Only when standing outside at idle can you hear the squeaking. I am going back to the dealer to get it checked on Tuesday just wanted some ideas.

Thanks in advance,
Rob
 

·
Registered
Joined
·
6,823 Posts
Do not use any type of belt dressing, or let the dealer even consider it. They can replace the belt in five minutes. Mine was making a chirping type marble in a can noise at cold startup with 5000 miles on the odometer. A light water spray on the belt silenced the noise instantly, so I then knew for sure it was the belt and not a bearing.
 

·
Banned
Joined
·
27,783 Posts
I would let the dealer handle it, it might be a bad bearing in the pulley.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top