[dwoelper]

You'll need to add aftermarket UCA's to that list other wise you have very bad coil bucket contact (like honda said)

You best bet would be to go with the cst 4" spindle kit, if you want to get alittle more height you can use 08+ pro 4x coils on your stock struts to get 1.5"+ extra like stryker recently did. The good part of the spindle lift is later on you can add UCAs and struts or coil overs.

-Dave

Sent from my DROIDX using AutoGuide App

 

[dwoelper]

Any other feedback on this topic? I was thinking of doing the same thing. Other than the godawful sound, what problems come about with coilbucket contact? I'm not familiar with suspension so I don't know any terms other than "harsh ride" lol

Dont get yourself into a suspension setup that will have cb contact, it can damage your cb and uca. Are you 2wd or 4x4?

Sent from my DROIDX using AutoGuide App

 

[dwoelper]

With the setup im moving to with the 5100s soon im lookinto gain an 1" to 1.5" front and rear. Currently im at 42.5" front and rear.

Sent from my DROIDX using AutoGuide App