[honda250xtitan]

bilsteins on their top setting will be very stiff. PLUS a 2.5 spacer and bilsteins all the way up equals lots of coilbucket contact with your uppercontrol arms. you get what you pay though,

 

[honda250xtitan]

I have my Bilstein 5100 set on the top notch (received them that way from RyBo) and I don't think they are harsh at all. I plan on adding a 2.5" to 3" spacer on top when I can get some PRG UCA's.

Is your sway bar on or off?

 

[honda250xtitan]

I kept my sway bar on. With just my Bilsteins, my 2WD is sitting at 37.5" front and rear. I definitely want more lift...I should have taken my CST spindles off of my truck before I traded it. I'm getting 275/65/20 (34") tires when I get my tax refund.

I can't decide if I should:

A) Set the Bilsteins on 0 and add 08+ 4x4 coils, RC 3" spacers and RC UCA for 5" of lift

or

B) Leave the Bilsteins 2 and add the RC 3" spacers and RC UCA for 5.5" of lift

I feel you'll have pretty bad contac even with the RC kit. AZpro4x showed me his RCuca's last year and they still were banging all on his coilbuckets like the stockers. 5" of lift on a stock spindle is impressive though, lucky 2wd. You gonna throw a block in the back to level it out?