Nissan Titan Forum banner

Calc. Load Val + Uphill

546 Views 1 Reply 2 Participants Last post by  deerslayer
Had a question for some of the tuning guru's,

Theoretically speaking, if your calculated load value is at 100% when flooring it, whether it's on a flat surface or incline, would the AFRs/timing be hitting their targets?

I was just curious because in my area, it's hard to find a nice flat spot to do 0-60s, and I have always tuned on inclines/declines... Would this affect my AFR/timing?
1 - 2 of 2 Posts

· Registered
Joined
·
5,523 Posts
Had a question for some of the tuning guru's,

Theoretically speaking, if your calculated load value is at 100% when flooring it, whether it's on a flat surface or incline, would the AFRs/timing be hitting their targets?

I was just curious because in my area, it's hard to find a nice flat spot to do 0-60s, and I have always tuned on inclines/declines... Would this affect my AFR/timing?
It won't affect afrs...........
 
  • Like
Reactions: Warp09
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top