Nissan Titan Forum banner
1 - 16 of 16 Posts

·
Registered
Joined
·
30 Posts
Discussion Starter · #1 ·
These are the rims that I am going to get. Can everyone who runs these rims please tell me what your BS and offset is (this wheel comes in 5.75 or 4.5 BS) and if you have any rubbing or clearance issues?

Posting a pic would be awesome as well. I plan to order these rims on Monday or Tuesday if you guys tell me I am not going to have an issue.

Thank you.
 

·
Registered
Joined
·
1,464 Posts
I have these wheels and have not issues with the wheels themselves. I am running a 13.5 tire that rubs on the fender liner up front and at the pinch weld area. It is nothing bad only in full lock LT or RT the pinch weld area is because the liner need to be reattached and it will be gtg.

20x10
-12mm offset
5.03 BS

 

Attachments

·
Registered
Joined
·
30 Posts
Discussion Starter · #4 ·
yscty said:
Well what size wheel you going with, 17",18", 20" and what will the width be ???
It looks like I will be going with a 17" which will be 9" wide (BS 5.75" +18mm offset I believe are the specs)



Thanks.
 

·
Registered
Joined
·
249 Posts
I have the Helo Maxx 6 in black. They are 18x9 with an offset of +18. They fit just fine with my 285/60/18's. No rubbing or anything. When you order them, ask for the hub centering rings. They are good wheels, if you have any problems they stand behind thier product. I know, I call them at least 10 times a day.


 

·
Registered
Joined
·
30 Posts
Discussion Starter · #7 ·
Thanks everyone. This helps alot. I am going to be ordering these wheels today.
 

·
Registered
Joined
·
19 Posts
Here is a pick of my Helo's with Cooper ZEON LTZ 285/60/18. My only regret is that I wish I went with a bigger tire.
 

Attachments

·
Registered
Joined
·
2,032 Posts
This first pic is mine with the 17s with a 18 of set and 285BFG A/Ts


This is mine with 18s on procomp 35s A/Ts
 

·
Registered
Joined
·
29 Posts
I am actually selling a set of these 18x9's on 35x12.50 Kumhos. Got bigger wheels. Message me if you are interested.
 

·
Registered
Joined
·
30 Posts
Discussion Starter · #11 ·
Well after posting this thread and getting all of your help I ordered a set of 18" Maxx6 wheels from 4wheelparts.com. I basically had to fight them to send me the 5.75" BS (+18mm offset) wheels instead of the 4.5" BS (-12mm offset) wheels. Wheels came in. Guess what! They sent me the 4.5" BS anyways.

Moral of the story. Do not do business with 4wheelparts.com.



Are these 4.5" BS wheels going to work with 285/65/18 tires?

Thanks.
 

·
Registered
Joined
·
795 Posts
I thought the Titan was lugcentric?
 

·
Registered
Joined
·
133 Posts
i ordered a pair of 17x9 and the guy told me that the negitive offset will fit better because of my lift. i hope he knows what he talking about. they should be here tuesday-ish.
 

·
Registered
Joined
·
30 Posts
Discussion Starter · #14 ·
motosyco said:
i ordered a pair of 17x9 and the guy told me that the negitive offset will fit better because of my lift. i hope he knows what he talking about. they should be here tuesday-ish.
What lift do you have? I am a little worried about them fitting but at the same time plan on doing a large lift in the next year or so and that will require the low offset (according to the lift manufacturer). Either way if the PWM is required I will be out there hacking it up.
 

·
Registered
Joined
·
133 Posts
i have the pro comp lift. i haven't got my rims and tires yet. they should be here tomorrow. i'll let you know how they fit.
 

·
Registered
Joined
·
133 Posts
just got my tires on with the neg. offset and they fit good. they only rubbed on the mud flap so i took them off. other then that great fit.
 
1 - 16 of 16 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top