Nissan Titan Forum banner

Camburg UCA with 5/8" spacers?

1087 Views 9 Replies 4 Participants Last post by  Delta15
will the Camburg UCA's work with my DR's (already installed) and the 5/8" spacers from Greg? i don't see why not but i thought someone might know something i don't.
1 - 3 of 10 Posts
If I remember correctly a while back alot of people were having alignment problems with camburg uca's
I assume this is the link you are referring to if not check it out

Just for a second let me play devils advocate and say your right

Why would you want to spend that much money on a uca that you can only use in one application?
Good luck with that!

Id rather purchase a set of prg arms and know they work than a set of camburgs and hope and pray they work for my application

remember they weren't designed to work with aftermarket spindles at least according to that thread
1 - 3 of 10 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.