[1bigredtitan]

I have an '07 SE CC with the front center seat that folds down w/cupholders on the back. These things are useless! They're too big and anything I put in them just slides around and spills all over the place. I always have to use the center bottle holder underneath the DC outlets, which is kinda inconvenient.

Does anyone know of any inserts available that will fit in these things? I've looked around on-line and in a couple auto shops and haven't been able to find anything that will fit.

 

[s3gunner]

I have an '07 SE CC with the front center seat that folds down w/cupholders on the back. These things are useless! They're too big and anything I put in them just slides around and spills all over the place. I always have to use the center bottle holder underneath the DC outlets, which is kinda inconvenient.

Does anyone know of any inserts available that will fit in these things? I've looked around on-line and in a couple auto shops and haven't been able to find anything that will fit.

I don't get many spills, but it rattles a can... I have a couple of the foam "can coolers" that tighten up the fit. No more rattles, and they are just snug in place. (mine have about 3/8" thick foam all around)

Steven

P.S. By the way, say hello to my cousin and her hubby down there... They are both doctors at the univ. down your way...lol

 

[Walrus]

Seems to me I have seen some inserts for these somewhere.

 

[roy365]

A can "coozie" or cooler will help like mentioned. I have to say that that I enjoy having a larger size for my coffee mug, gatorade or any other larger container. So it's good and bad i guess?

 

[shdw03]

i remember reading somewhere that someone that modified a frontier insert to work

 

[dut]

My cupholders are too small, can't hold a gatorade bottle - or something similar to size. I'm talking about these:

 

[s3gunner]

My cupholders are too small, can't hold a gatorade bottle - or something similar to size. I'm talking about these:

YEP... I think he means the smaller sized bottles. Your's is not exactly the same as mine.... My "cubby" is always close to full! I found out my lap-top fits in it perfectly however. (I'll make new shorter plastic dividers) With the power outlet right there, it might be a handy place for it...

Steven

 

[1bigredtitan]

My cupholders are too small, can't hold a gatorade bottle - or something similar to size. I'm talking about these:

Yep, those are the ones I'm referring too. And yes, I'm talking about smaller 20oz bottles, cans, and your generic paper cups from restaurants, etc.

Definitely seems like removable rubber inserts for these should come standard. When I bought my truck used a couple months ago, I thought maybe mine had some but were just lost or swiped...until I saw all the other trucks without them.

Seems kinda like a nit-picky thing, but it's just one of those irritable things I wish they had done differently.

 

[dut]

Yep, those are the ones I'm referring too. And yes, I'm talking about smaller 20oz bottles, cans, and your generic paper cups from restaurants, etc.

Definitely seems like removable rubber inserts for these should come standard. When I bought my truck used a couple months ago, I thought maybe mine had some but were just lost or swiped...until I saw all the other trucks without them.

Seems kinda like a nit-picky thing, but it's just one of those irritable things I wish they had done differently.

Yea, it sucks. I did have a smaller drink moving around on the way home from the desert the other week. Seems like they didn't make these for small OR large drinks. :domohit:

 

[PRJ]

Gatorade bottle fits in the side door. Thats why there is the roundish shape in that compartment along with a roundish shape cut out in the door panel.

 

[dut]

Gatorade bottle fits in the side door. Thats why there is the roundish shape in that compartment along with a roundish shape cut out in the door panel.

Yea, thats where I put mine.

Funny, just came back from Jack in the box... The drinks weren't even close to fitting. They need those rubber things like other manufacturers use. LOL.

 

[roy365]

I think they are intended for fast food joints cup sizes. Ever notice how much better those fit than a 20 oz or 12oz can? Try fittin a 64 oz big gulp in ANY other cup holder huh? :rofl:

 

[titanss]

Just take the console out and use the ones under it. LOL:rofl:

 

[roy365]

Holy s**t man!!!! That's a fortress of boom behind you.

 

[miketan]

I agree. The cupholders are pretty much useless especially if you like to drink those smaller 17oz mountain spring water bottles like I do. Suprisingly, Nissan doesn't offer "inserts" as an option or even as an accessory from the parts dept.

You'd think by now, some aftermarket company who specializes in Titan accessories would've come out with something to fit inside the stock cupholders. Why doesn't Nismo carry anything like this? They seem to be the front line leader in non-performance Titan items.lol!

I guess you can always use those foam drink "cozie's" like someone above suggested, but then it starts to look kinda "ghetto" if you know what I mean. I want an insert that looks factory, or like a factory option.

 

[Shane06fl]

And if they were smaller you all would complain about that too. It's a happy medium with things like this.
I keep a plastic tumbler in my truck at all times, it is my truck cup and only comes out to be washed. If I can't pour a drink in to it I will put the smaller cup directly in the tumbler. no mess and easy to drag my beverages around with me. My wife buys the tumblers and over size plastic cups at the dollar store, 4 for $1.

 

[2007 TITAN LE]

That is why the center console is the way to go. It is by far the most useful center console I have ever seen in a vehicle. The cup holders are great, can hold large and small cups. Plenty of storage area, a little shelf like surface to set fast food bags, cell phone, i pod etc on. Plus the center shift knob is sweet in a truck.

 

[Johnny08]

Just take the console out and use the ones under it. LOL:rofl:

Holy crap..... Is that the new 08 2 seater Titan you have there ? :ugh:

 

[dragonhead08]

I bought some inserts from a frontier and modified them to fit. Way more usefull now.

 

[titanss]

Holy s**t man!!!! That's a fortress of boom behind you.

No Man, I Wish, That is not my system, Got the pic. over at CT for the SRS controller cover/cupholders.