Nissan Titan Forum banner
1 - 20 of 39 Posts

· Registered
Joined
·
999 Posts
Discussion Starter · #1 · (Edited)
Ok folks the 2014 Season of truck pulls is getting closer by the day and i am itching to get going. I wil start with a recap of the 2013 season and how well the Nissan Titan did against all the competition!

There are two sanctioned pull series that i pull in. The ATPA and VTPA
Adirondack tractor pullers association ( ATPA )
Vermont Tractor Pullers Association ( VTPA )

Both have a different set of rules and weight classes . This makes it more challenging and each state NY and VT have very different tracks! NY is more dirt and gravel tracks and VT is more clay. This makes tire choice..air pressure..rpm choice..shift points all change...as well as other things. So with this the challenge of figuring out the tracks alone is very difficult. Then add in rain or super dry conditions and it all changes again. NOT EASY TO LEARN.

Ok so results of the 2013 pull season.

ATPA

5500 pound class
We took first place in the points Championship! 5 straight years in a row!
6500 pound class
We took first place in the points Championship!

VTPA

5800 pound class
We took first place in the points Championship!
6800 pound class
We took first place in the points Championship!

This was the first year pulling with the VTPA! So we cleaned up in both series and put Nissan Titan in the record books!

I am proud to announce some new sponsors to this seasons roster!

1. Level ten transmission
2. Odyssey batteries
3. UPREV
4. PML
5. JBA
6. Peak Speed Shop

So i will keep everyone posted on schedule and results! I will do my best to keep our Titan on TOP!:big_grin:
 

· Registered
Joined
·
997 Posts
Good luck Walt, your videos are great. Uprev and that lvl 10 tranny should net a considerable amount of power gain. Glad you have some good sponsors behind you, as well as this forum. Good luck and remember, "if your not first your last" lol


Sent from AutoGuide.com App
 

· Registered
Joined
·
999 Posts
Discussion Starter · #3 ·
Good luck Walt, your videos are great. Uprev and that lvl 10 tranny should net a considerable amount of power gain. Glad you have some good sponsors behind you, as well as this forum. Good luck and remember, "if your not first your last" lol


Sent from AutoGuide.com App
Thanks ! I am really excited to get the truck all done and get some pulls in! I will have lots of vids coming up soon!
 

· Premium Member
Joined
·
2,326 Posts

· Premium Member
Joined
·
2,326 Posts
Nice
Jealous man, are you going to do a before an after dyno by any chance?
She's going to be a whole different animal!!


Sent from AutoGuide.com App
 

· Registered
Joined
·
997 Posts
You've done all the right mods IMO. Doesn't get much better... Kickin *** and taking first should be much more fun now!


Sent from AutoGuide.com App
 

· Registered
Joined
·
999 Posts
Discussion Starter · #13 ·
I Cant thank you guys enough! I will do my best to find a dyno around me...i dont know if there even is one within a reasonable drive. After these are all bolted on and tuned i take the road trip to LEVEL TEN for all my trans MODS! Talked to them again yesterday and they are super excited to build this trans for me to withstand the abuse the added HP. I still have Sponsorship proposals out with various vendors. I am in need of an aluminum Radiator and i would love to hook up some E fans to cool down my truck between pulls. So those are on my wish list still. Does anyone know where i can get that sweet E fan setup i see on here? i heard they dont make them anymore? I will keep you all updated as move forward.

Its funny really that my biggest competition is the Tundra...and the ones that give me a hard time every season had a bunch of work done like exhaust and a tuner so i was informed by my "RAT" :) They are saying that they are going to finally kick my @ss this season....Boy are they going to be surprised ! I would love to see their face when i crack this monster open that first pull :)
 

· Registered
Joined
·
999 Posts
Discussion Starter · #16 ·

· Registered
Joined
·
999 Posts
Discussion Starter · #18 ·
lol...i cant wait to start the build process. almost ready now...few weeks i think.

still need the following

1. aluminum radiator
2. e fan setup
3. external trans cooler with bypass
4. a lot more money :)
 
1 - 20 of 39 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top