Posts by Mrmegnum
1 - 20 of 89 Posts
Joined
·
141 Posts
I will do a little in depth write up when i get the chance, but yes the eyebrows are made from acrylic rod with surface mount leds in each end and the halo's look much better recessed in the housing than on the front IMO. I have a 3d printer that i used to print the brackets to hold the halo suspended in the middle like so, and if anyone wants to do the halo like that let me know and i can print some up for a small fee.
Joined
·
141 Posts
Yeah there is a control unit for the color changing.
Prices i'm thinking are these at the moment.
Just blackout
$170
Blackout with single color halo (Choice of color)
$220
Blackout with eyebrow (Eyebrow has choice of colors)
$220
Blackout with single color halo and eyebrow (Eyebrow and halo have choices of colors)
$260
Blackout with RGB halo (RGB controller will need to be wired into truck, with just a switched power)
(Controller has a remote and sensor so the color can be changed at push of a button)
$260
Blackout with RGB halo and single color eyebrow (RGB controller will need to be wired into truck, with just a switched power)
(Controller has a remote and sensor so the color can be changed at push of a button)
$300
Color choices for halo and eyebrow
White
Red
Green
Blue
Orange
Amber
All the headlights would be plug and play. The halo and eyebrow would replace the marker bulb on the side so that they could plug directly in without hacking wiring in the truck. As for RGB, there is an auxiliary plug that would exit the housing for the controller box to be plugged in.
Prices i'm thinking are these at the moment.
Just blackout
$170
Blackout with single color halo (Choice of color)
$220
Blackout with eyebrow (Eyebrow has choice of colors)
$220
Blackout with single color halo and eyebrow (Eyebrow and halo have choices of colors)
$260
Blackout with RGB halo (RGB controller will need to be wired into truck, with just a switched power)
(Controller has a remote and sensor so the color can be changed at push of a button)
$260
Blackout with RGB halo and single color eyebrow (RGB controller will need to be wired into truck, with just a switched power)
(Controller has a remote and sensor so the color can be changed at push of a button)
$300
Color choices for halo and eyebrow
White
Red
Green
Blue
Orange
Amber
All the headlights would be plug and play. The halo and eyebrow would replace the marker bulb on the side so that they could plug directly in without hacking wiring in the truck. As for RGB, there is an auxiliary plug that would exit the housing for the controller box to be plugged in.
Joined
·
141 Posts
Send me a PM whenever you want to have it done.
Joined
·
141 Posts
Halos are 80mm. Got them from superbrightleds. I chose led halos because there have been a lot of complaints about the ccfl ones failing which required the headlight to be ripped apart. These are more reliable, and of course are plug and play and don't require a transformer.
For anyone who wants to do the halo mod themselves I can make sets of brackets.
It would be $25 shipped for them.
All you need to do is epoxy them to the back side of the cylinder and then the halo gets epoxied to the front of them.
For anyone who wants to do the halo mod themselves I can make sets of brackets.
It would be $25 shipped for them.
All you need to do is epoxy them to the back side of the cylinder and then the halo gets epoxied to the front of them.
Joined
·
141 Posts
Sent you a PM
Joined
·
141 Posts
Hope the brackets work well for you.
Of course let me know how it all ends up.
Joined
·
141 Posts
Had some time today to remodel my brackets a little to make them able to hide the wiring as much as possible.
Just thought I'd let everyone know what they look like in case they wanted a set.
They're printed in black abs so they don't stand out.
Just thought I'd let everyone know what they look like in case they wanted a set.
They're printed in black abs so they don't stand out.
Attachments
Joined
·
141 Posts
I think i get what you are asking and yes. I painted the front housing as well as the rear, but just the parts where the light wasn't needing to reflect. The lens itself was left alone.
I like the sound of you sending your lights up here to have me do them. You'd be very pleased with the product. :eyebrow:
Joined
·
141 Posts
Send me an example of what lights you are referring to. Lots of aftermarket lights are called "JDM" and messing with aftermarket lights isn't always worth it. Was this truck even offered in japan?
Joined
·
141 Posts
Well doing the eyebrow like that would definitely be possible. I can make it part of the turn signal no matter where it is in the light. It won't brighten and dim though. Just turn on then off. I'm still feeling a little cautious about doing your aftermarket lights. The plastic on those can be super cheap and warp and melt much easier than the oem, especially the lens. You wouldn't possibly have your oem ones still would you?
Joined
·
141 Posts
Alright I'm dropping the prices. There seems to be a lower rate going right now so here's the updated prices.
Just blackout
$100
Blackout with single color halo (Choice of color)
$160
Blackout with eyebrow (Eyebrow has choice of colors)
$160
Blackout with single color halo and eyebrow (Eyebrow and halo have choices of colors)
$200
Blackout with RGB halo (RGB controller will need to be wired into truck, with just a switched power)
(Controller has a remote and sensor so the color can be changed at push of a button)
$230
Blackout with RGB halo and single color eyebrow (RGB controller will need to be wired into truck, with just a switched power)
(Controller has a remote and sensor so the color can be changed at push of a button)
$270
Color choices for halo and eyebrow
White
Red
Green
Blue
Orange
Amber
All the headlights would be plug and play. The halo and eyebrow would replace the marker bulb on the side so that they could plug directly in without hacking wiring in the truck. As for RGB, there is an auxiliary plug that would exit the housing for the controller box to be plugged in.
Just blackout
$100
Blackout with single color halo (Choice of color)
$160
Blackout with eyebrow (Eyebrow has choice of colors)
$160
Blackout with single color halo and eyebrow (Eyebrow and halo have choices of colors)
$200
Blackout with RGB halo (RGB controller will need to be wired into truck, with just a switched power)
(Controller has a remote and sensor so the color can be changed at push of a button)
$230
Blackout with RGB halo and single color eyebrow (RGB controller will need to be wired into truck, with just a switched power)
(Controller has a remote and sensor so the color can be changed at push of a button)
$270
Color choices for halo and eyebrow
White
Red
Green
Blue
Orange
Amber
All the headlights would be plug and play. The halo and eyebrow would replace the marker bulb on the side so that they could plug directly in without hacking wiring in the truck. As for RGB, there is an auxiliary plug that would exit the housing for the controller box to be plugged in.
1 - 20 of 89 Posts
