Nissan Titan Forum banner

Dirt King installation help

1544 Views 4 Replies 2 Participants Last post by  honda250xtitan
Hi guys, I am currently installing new Dirt King UCAs and LCAs. Uppers went pretty easily. Got a question about the lowers tho..
I followed the instructions that came with the install, but noticed the joint between the LCA and the spindle does not seem to be all the way down. I removed the bolt and tried for a good 2 hours to get it to drop a bit more to no luck. Is this the way it is supposed to sit? Or am I just not doing it correctly?

First pic is new UCA and LCA installed
Second is the LCA
3rd is a close up of the part I am referring to.


See less See more
1 - 3 of 5 Posts
Awesome thanks!!! I was so worried I fussed with it for atleast 1 1/2 hours. Probably could have been finished. Oh well. Lol. Thanks again
Btw.. in that first picture you can see the red bump stop I was referring to the other day.
  • Like
Reactions: 1
1 - 3 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.