Nissan Titan Forum banner

Door handle help!!!

976 Views 4 Replies 4 Participants Last post by  AF-Medic
I took my chrome handles off and replced them with black. I got 3 of them finished but I can't get the Escuctchen with the lock to line up with the screw. I have the lock pushed all the way against the door and I can tell the screw as been hitting short 1/8 inch. Any one got any ideals? I have spent 3 hours trying to get this dang screw in. I have tried everything I can hthnk of. I dont want to have to take it ot the delaer. Thanks in advance,
1 - 5 of 5 Posts
Try switching it around with one you have already installed and see if does the same thing.
I'm thinking about doing this also.

Good luck with the last one.
You have to snap the lock into the eschulon before you try to screw it down.
azsailor said:
Try switching it around with one you have already installed and see if does the same thing.

It only has one key hole estcheon. I have tried it on and off and nothing seems to make it line up.
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top