Nissan Titan Forum banner

Drive Shaft Center Bearing

6318 Views 4 Replies 4 Participants Last post by  TitanBlue
I have a 2008 Titan 4x4 with 159.5" WB. The center bearing support is worn and wobbling at 40-45 mph. I need to replace it but can't find one that has the larger I.D. bearing for my truck. Apparently the 4x4 has a larger bearing that a 2 Wheel Drive. The drive shaft is fine so I don't want to buy The Whole thing if I can get a good used or a new one. HELP

Attachments

See less See more
1 - 1 of 5 Posts
i had to go to the dealer for mine. i'm 2wd longbed and all the local auto parts store all came up with the same part # which the ID was too small. when i went to the dealer they ordered what they thought was the correct bearing but when it showed up it also had the smaller ID. So they ordered the optional bearing which was in fact the correct one when it arrived. go figure!
1 - 1 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top