Nissan Titan Forum banner

1 - 12 of 12 Posts

·
Registered
Joined
·
70 Posts
not going to do your titan project anymore??
 

·
Registered
Joined
·
299 Posts
Discussion Starter · #3 ·
Too many projects im working on for the future, not necessarily truck related. I also have a complete airride system available too. A package deal can be worked out.
 

·
Registered
Joined
·
299 Posts
Discussion Starter · #6 ·
Same builder, different setup. Mine are built from scratch and require new upper and lower control arms. The ones you saw on ebay are modified stock spindles. Mine will allow you to lay up to a 26" wheel with max travel and have no allignment issues.
 

·
Registered
Joined
·
97 Posts
FFtitan said:
Same builder, different setup. Mine are built from scratch and require new upper and lower control arms. The ones you saw on ebay are modified stock spindles. Mine will allow you to lay up to a 26" wheel with max travel and have no allignment issues.
any pics and do you have any problems with bottoming out or binding suspension parts?
 

·
Registered
Joined
·
299 Posts
Discussion Starter · #9 ·
Also have the following.

(4) Slam Specialties Re-7 bags
(2) Viair 450 compressors
(4) GC Extreme 1/2" Valves
(2) 7 Gallon Air Tanks
(1) White Face Dual needle Gauge

Sell the airride complete for 750 or airride and spindles for 2000 shipped... All you will need is a 4-link for the rear ($300) and have a set of upper and lower control arms be built which if you give me a few months I can help you with if you dont have a custom shop in the area that can do it.
 
1 - 12 of 12 Posts
Top