Etvalley back up camera

962 Views 2 Replies 3 Participants Last post by mbquart1, Apr 19, 2016

HOGHUNTERS

Discussion Starter · Apr 14, 2016

Ok, First I have looked through every camera thread on here and still am not getting Image.... I get the head unit to show that its recognizing camera but there is no image..It just says : "Caution image may appear upside down" The camera came with a Yellow video RCA that also has a red wire built into it, so I attached that to the Wire for reverse light on HU, have RCA in Video IN, and then have power and ground directly to battery. And it has small LED lights on camera so I know it is getting power. BUT NO IMAGE.. I have played with all the HU's settings and still nothing..Could I just have gotten a bad camera????

Save

1 - 3 of 3 Posts

TheHops

· #2 · Apr 14, 2016

HOGHUNTERS said:
Ok, First I have looked through every camera thread on here and still am not getting Image.... I get the head unit to show that its recognizing camera but there is no image..It just says : "Caution image may appear upside down" The camera came with a Yellow video RCA that also has a red wire built into it, so I attached that to the Wire for reverse light on HU, have RCA in Video IN, and then have power and ground directly to battery. And it has small LED lights on camera so I know it is getting power. BUT NO IMAGE.. I have played with all the HU's settings and still nothing..Could I just have gotten a bad camera????

May seem like a really stupid answer, but...make sure there's no lens cap or cover or anything on the camera lol.

Aside from that, I'm not sure...I'm not really a wiring guy. If everything is hooked up according to the instructions, it very well could be a dud.

:nerd: 2010 Pro-4x CC [Snoopy] :nerd:
Suspension: 6 inch ProComp, ATX AX181 teflons, 305/70R18 Cooper STT Pros, ICONs on all corners, DK UCAs, DK tie rod ends, sway bar delete.
Power: UpRev, Airaid MXP CAI, JBA LTs, Cajun resonated bpipes, SummitRacing y-pipe, Borla 40085, UQ res.
Body: Leer 100RCC (reinforced), RKSport ram-air hood, FabFours premium front bumper, Rigid grille, Bushwacker smooth flares, Go Rhino Dominator D2 steps, spray in bed liner.
Roof: Thule tracks, frontrunner roof racks. Front: 40" bar, L/R facing 10" light bars, MAXTRAX mounts, 20gal spare fuel brackets. Rear: axe/shovel, CVT RTT, 10" rearward light bar
Lighting: Full internal/external LED swap. Front: 40"/20" Amber/White LED bars, two 3" A/W pods. Sides/Rear: Three 10" white bars.
Misc: Mile Marker SEC9.5 (ES), Cobra 75WXST, 600W PSW Inverter, ARB CKMTA12, WeatherTech floor liners, DU-HA rear underseat tub, AVS in-channel visors, stubby antenna, seat mounted fire extinguisher, cajun axle vent.
Pending Install: Fab fours premium rear bumper, CJD trac bars, C-30s, DK variable height shackles.

Save

mbquart1

· #3 · Apr 19, 2016

What HU. Pioneer is extremely finicky about some settings

20" Black Burst Wheels, Paranha Body Kit, Airaid CAI, PRG 2" Drop Shackles, Black Dual Halo Projector Headlights, 8K HIDs, Smoked LED Tail Lights, Smoked LED Third Break Light, All LED Interior Lighting. 1 Kinetik HC2000 Pro Battery for starting 2 Kinetik HC 2000 Blue batteries for audio. Grounding Kit, Custom Battery Connections. Megillian GPS in OEM Location, OEM Rockford Head Unit, JBL MS-8,Precision Power DEQ-8, Precision Power Phantom Amps, PPI Power Class Components for Front Stage, PPI Art Components for Rear Stage, PPI Art SQ 8 Subs, Scosche EFX wiring and Fusing. AutoPage Security With Remote Start and Remote Climate Control.Green Accent Lighting. Up Rev ,Keystone Good Hood, JBA Long Tubes, JBA Catback, and Cajun Catless B-pipes

3rd Place 2012 USAC World Finals Mod SQ
2nd Place 2012 IASCA Finals Amature IQC
1st Place 2013 IASCA Spring Break Nationals Amature ICQ

Save

1 - 3 of 3 Posts

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.

Top Contributors this Month