Nissan Titan Forum banner

Fuse block/terminal block mounting

3271 Views 9 Replies 4 Participants Last post by  Ducks_and_dogs1984
So I am getting ready to clean up the wiring in the engine bay for all my lights. I am wanting a centralized location for the relays and fuses. If anyone has done this I would love to see how and know how and where everyone put everything for some ideas. Extra light is great a birds nest of wires under the hood is not.
  • Like
Reactions: 1
1 - 1 of 10 Posts
Hey man, this setup looks good! The only recommendation I would make is to remove your accessory system negative lead or "ground" from the battery and find a good place to ground it out to the chassis. There is a lot of literature of why you don't want to do this on the internet but in short, with the cables going directly to the battery, you run the risk of pulling power from critical systems and efficiency of alternator, and you are now relying more on the main battery ground cable to carry the amps of your accessories as well. Besides that, it looks awesome. great work
1 - 1 of 10 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.