Nissan Titan Forum banner

Help me decide!

1837 Views 7 Replies 5 Participants Last post by  LaxDfns15
2
So I'm very indecisive when it comes to picking out a wheel/tire combo for my 2017 Pro4x. I've narrowed it down to a few different options. Chime in if you would and just help me decide.

I'd prefer not to do any lifting right now, but not opposed to doing some trimming. With that being said, the 3rd option would require a small lift. I would likely get a 2"x1" leveling kit and UCA's if I went that route, but that adds more $$ up front.

I like the Method Mesh wheels a lot, but hate that they don't come in something close to a 0 offset. I also prefer BFG KO2's, but they don't make them in the size needed for option 3.

1. BFG KO2 305/65R18 (33.6"x12") with Method Mesh 18x9 +18 offset.
2. BFG KO2 305/55R20 (33.2"x12") with Fuel Lethal 20x9 +1 offset.
3. Nitto Ridge Grappler 295/70R18 (34.2"x11.6") with Method Mesh 18x9 +18 offset.

Attachments

See less See more
1 - 2 of 8 Posts
I'm equally indecisive. If I were looking at a +1 offset, I'd look at the Fuel Sledge. That was the wheel I really wanted but didn't come in a +20. Of the two you posted I probably prefer the Fuel. I think the Method looks a little cheap IMHO.

I'd want to see a 0 offset with a 305. From a +18 you're picking up about 0.75" on the offset plus more on your tire. That may be too much for my taste.

I posted a profile shot of the +20 with a 295 in my thread so you can see how it looks.

Personally I'd go option 3. I think a 34 on an 18 inch rim looks great, and I love the Nittos. My least favorite of your options is #2 because I don't care for the look of a 33" tire on a 20" rim. I think 20s need 35s.
1 - 2 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top