Nissan Titan Forum banner

Help me decide!

1834 Views 7 Replies 5 Participants Last post by  LaxDfns15
2
So I'm very indecisive when it comes to picking out a wheel/tire combo for my 2017 Pro4x. I've narrowed it down to a few different options. Chime in if you would and just help me decide.

I'd prefer not to do any lifting right now, but not opposed to doing some trimming. With that being said, the 3rd option would require a small lift. I would likely get a 2"x1" leveling kit and UCA's if I went that route, but that adds more $$ up front.

I like the Method Mesh wheels a lot, but hate that they don't come in something close to a 0 offset. I also prefer BFG KO2's, but they don't make them in the size needed for option 3.

1. BFG KO2 305/65R18 (33.6"x12") with Method Mesh 18x9 +18 offset.
2. BFG KO2 305/55R20 (33.2"x12") with Fuel Lethal 20x9 +1 offset.
3. Nitto Ridge Grappler 295/70R18 (34.2"x11.6") with Method Mesh 18x9 +18 offset.

Attachments

See less See more
1 - 3 of 8 Posts
IMO find a wheel thats gonna be the offset you actually like. otherwise you'll be adding wheel adaptors. I'm sick of the Fuel wheels, i ran the Fuel Boosts from 2011 to this past month when i sold the truck lol. KMC XD series has a few sweet wheels IMO. Pro Comp also has a couple new ones that look great. I think both brands have a similar style as the Method Mesh.
I 100% agree on the offset. Stock offset on 9" wide wheels is +12. I'd go with as close to a 0 or -12 if I could do it over again. I have +12's and wish I had another .5-1" of negative offset.
2
To give you an idea, here's my 9" wide +12 offset wheel with 275/70R18 tires. Second picture is with 1" adapter so it'd basically be a -12 offset. A 305 tire will stick out roughly .6" more than the 275 tire.

Don't know why they're sideways in the thumbnail, but show up correctly when you click on them.

Attachments

See less See more
There was no rubbing with the 1" spacers (don't have them on anymore), but those are stock tires. I plan on moving up to 295/70R18 once these wear out, but I'm also lifted 3" so I doubt I'll have any rubbing. If the new tires don't stick out as far as I want I'll probably get spacers again.
1 - 3 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top