Nissan Titan Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
942 Posts
You say you wired directly to your battery? Is there an inline fuse? If not, did you go through the fuse box before connecting to the battery? Although the system is a 12VDC system, a fuse acts as a resistor (well, actually a fuse IS a resistor, with a high limit amperage beore blowing at that specified amperage), my guess is if you did not have any fuses on the system, then you were drawing too much amperage from connecting directly from the battery instead of allowing the fuse to control the current flow...
Hope this helps a little, let me know what you find...

:blueblob:
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top