Nissan Titan Forum banner

Help with cubby removal

1381 Views 3 Replies 4 Participants Last post by  dubyam
I am looking to remove the center cubby hole under the factory radio to slide a 10 meter radio in. My question is exactly how or if you can even just remove it for if it would have to be cut. It's just an idea on a clean install. Thanks in advance. ( I have made several attempts to upload the image of exactly I'm referring to but confines with error)
1 - 1 of 4 Posts
I've not tried to remove the center stack, where the cubby you're referring to is I presume. New here so not familiar with the differences in model year layout.
Have you tried searching to find a thread about removing the radio/bezel/center stack?
Have you tried uploading pictures through Photobucket or something similar? It's fairly straightforward and a free site to boot.
Wish I could help more, good luck with your quest.
1 - 1 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top