Nissan Titan Forum banner

Hopkins Brake Controller

3627 Views 5 Replies 6 Participants Last post by  DarrenDriven
I have a Hopkins brake controller that I cannot get to to work properly. I wired it the same as an 05 Titan that I saw, (I have an 07) and now my trailer brakes lock up as soon as I hit the brake peddle. The adjustment on the controller does not seem to work at all. Any ideas besides throwing it against a wall and purchasing something else, because I have already thought of that!
1 - 6 of 6 Posts
Sometimes it's easier to get a new one (Prodigy) than fart around with an old one. Does yours have to be installed level?
BuckyBadger said:
Sometimes it's easier to get a new one (Prodigy) than fart around with an old one. Does yours have to be installed level?
I bought the Prodigy because so many here raved about it. I spent a few bucks more and got the Nissan wire harness connector. Hooking it up and making it work was sooooooooo simple. I'm so happy people spoke about the Prodighy so much around here.
Css said:
I have a Hopkins brake controller that I cannot get to to work properly. I wired it the same as an 05 Titan that I saw, (I have an 07) and now my trailer brakes lock up as soon as I hit the brake peddle. The adjustment on the controller does not seem to work at all. Any ideas besides throwing it against a wall and purchasing something else, because I have already thought of that!
I bought a Hoplins brake controller and had trouble also. I also bought the pig tail that plugs into the controller and the truck. The wiring in my pig tail was the culprit. After the tail was rewired the box worked fine. I notified Hopkins and they ened up paying the rewiring bill. This is not the first time they had trouble with a brake controller, so before you smash it contact them by phone.
had the same problem when I went to use my buddies trailer, teh brakes locked up as soon as my foot hit the pedal, problem was is his trailer and my brake box.
I took my Hopkins out of my Tundra, but didn't pay attention to wiring... anyone have the color codes for the Hopkins harness?

My guesses:
Red: constant +12V
White: ignition +12V
Black: ground
Blue: out to trailer

I tried to look this up on the net, but can't seem to even find the website for Hopkins!
http://www.google.com/search?q=hopkins+brake+controllers
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top