Nissan Titan Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
2,758 Posts
I did this on mine. I used Tasca for the foam. It wasn't real hard but it was time consuming and cut my fingers up some on the seat pan.
 

·
Registered
Joined
·
2,758 Posts
Thanks for the response guys! I did find the seat foam part on Tasca and plan on ordering it soon. If I do tackle this project, I'll be sure to try to either take some video of the repair, or at a minimum lots of pics to help other's out.

jdmartin, would love to hear of any other adventures you had with the swap out. Looks like it's doable, but will be a pain to swap out. I just got my truck used this year and it's my first full sized truck so looking to be doing lots of mods to it hopefully.

SEAT CUSHION PAD - NISSAN (87761-7S200) $55
https://www.tascaparts.com/oem-parts/nissan-seat-cushion-pad-877617s200/?c=Zz1ib2R5JnM9ZnJvbnQtc2VhdC1jb21wb25lbnRzJmE9bmlzc2FuJm89dGl0YW4meT0yMDA0JnQ9eGUmZT01LTZsLXY4LWdhcw%3D%3D
I did mine maybe last year? Can't remember for sure. The hardest part about the job was hooking the new hog rings up in the crease part of the cushion. That part wasn't a lot of fun. Also, my power seat switch one of the plastic ears cracked and broke when I was putting the upholstery back on. It stays on pretty solid just using the upholstery to keep it in place, but not quite as good as before the ear was broken.

I will say it was definitely worthwhile. My old cushion wasn't torn, but it was so soft that I could feel the metal bar that holds the seat cover on through the seat. Putting the new cover on made it feel like a new truck again.
 
1 - 2 of 2 Posts
Top