Nissan Titan Forum banner

hubs replaced

774 Views 3 Replies 3 Participants Last post by  Brokntony
Hey I haven't posted in a while but I've still been here. This weekend I tackled replacing my front hubs. Using the thread on here it was generally a piece of cake...except for the damn ABS plug. Yep, I stripped the TINY wires right out of their socket (on both sides), so now my 4WHL, Brake, ABS, and SLIP lights are all on. I was super afraid that the truck would be in limp mode but it drives just like always. So my question is, how long can I leave the wires loose until I can either solder them myself(doubtful) or get it to an electric shop to fix it for me? I'm hoping my local auto electric shop can just get the wires back into their original plug so I can just plug it back in and be done.
1 - 1 of 4 Posts
Your best bet is two replacement sensors try lkq they are a retailer of used parts. As stated above no sensor means no abs. Most reputable shops won't touch the sensors, as in placing the wires back in for the liability they would have if something went wrong down the road.
1 - 1 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.