[Ziminskas]

Does anyone who has an SE or LE know the distance between the bottom of the door, to the bottom of the side molding? I purchased side moldings for my XE and I am about to install them. Thank you.
I have a picture of what im talking about but i dont know how to put it in this bulletin....

 

[TitanTeamRoper]

i believe its between 8-9 inches, but let me go check

 

[sudden urge]

The top edge of the moulding is exactly 1 1/16" from the bottom edge of the TITAN V8 logo.

 

[TitanTeamRoper]

The Back door is about 9 1/4" inches from the bottom including the curve of the door. But the front door is different, its 9 1/4" at the back of the door, but 42" from the back of the front door its on 9" From the bottom. I'm guessing its because they way it contours

 

[sudden urge]

The Back door is about 9 1/4" inches from the bottom including the curve of the door. But the front door is different, its 9 1/4" at the back of the door, but 42" from the back of the front door its on 9" From the bottom. I'm guessing its because they way it contours

That's why I gave him the measurement from the TITAN V8 lettering. He can use a straight edge against the letters and get a straight line.

 

[Ziminskas]

thank both of you very much

 

[matthews]

i believe its between 8-9 inches, but let me go check

Hehe, YOU wish

 

[TitanTeamRoper]

Hehe, YOU wish

Went to lunch, I drive a Titan Not This:

Prosche 911 GT2 MSRP: $191,700.00