[HisMajestyKingTitan]

I upgraded the interior bulbs to white leds.

It's twice as bright and look awesome in my opinion.

Used these for the map lights.


https://www.amazon.com/gp/aw/d/B00AO04VCY/ref=yo_ii_img?ie=UTF8&psc=1

And these for the foot well lights.

https://www.amazon.com/gp/aw/d/B014K7F2SI/ref=yo_ii_img?ie=UTF8&psc=1

 

[hondarider65]

I upgraded the interior bulbs to white leds.



It's twice as bright and look awesome in my opinion.



Used these for the map lights.





https://www.amazon.com/gp/aw/d/B00AO04VCY/ref=yo_ii_img?ie=UTF8&psc=1



And these for the foot well lights.



https://www.amazon.com/gp/aw/d/B014K7F2SI/ref=yo_ii_img?ie=UTF8&psc=1

So clean


Sent from my iPhone using Tapatalk

 

[Ducks_and_dogs1984]

Looks good!

 

[Tristan Downey]

I changed to LED's for the overhead. I didn't think about changing out the lower ones. How many bulbs are down there?

 

[HisMajestyKingTitan]

I changed to LED's for the overhead. I didn't think about changing out the lower ones. How many bulbs are down there?

2. One in each footwell.

 

[santis00]

How difficult was the install? I am going to order those bulbs, came out nice just dont want to break any plastic.

 

[HisMajestyKingTitan]

How difficult was the install? I am going to order those bulbs, came out nice just dont want to break any plastic.

The 2 reverse lights, the tail gate lights, the 4 maps lights, the 2 footwell lights, and the 2 fog lights take a total of 14.5 mins to replace.

It's so easy, a caveman can do it.

The hardest part is making sure the polarity on the bulbs is correct. If not, just flip it.

 

[santis00]

sweet. just told my wife i wanted these lights for my bday coming up. The one that drive me crazy is the freaking tailgate light. lets throw leds in the bed and above but leave lame lights in the tailgate. looks so freaking lame

 

[fishnmagician]

I just did the same too. Picked up my '17 Platinum Reserve on Friday....hate the yellow lights. All i have left to do is change the fogs and i will be done. Love this truck.

 

[djmoore250]

The 2 reverse lights, the tail gate lights, the 4 maps lights, the 2 footwell lights, and the 2 fog lights take a total of 14.5 mins to replace.

It's so easy, a caveman can do it.

The hardest part is making sure the polarity on the bulbs is correct. If not, just flip it.

Those lights look great. What bulbs did you use for the reverse lights, tail gate lights and fog lights? Already put the map and footwell bulbs in my amazon cart!

 

[djmoore250]

Those lights look great. What bulbs did you use for the reverse lights, tail gate lights and fog lights? Already put the map and footwell bulbs in my amazon cart!

Disregard, I got the info I needed from your post about the fog lights

 

[TITANUP2017]

The 2 reverse lights, the tail gate lights, the 4 maps lights, the 2 footwell lights, and the 2 fog lights take a total of 14.5 mins to replace.

It's so easy, a caveman can do it.

The hardest part is making sure the polarity on the bulbs is correct. If not, just flip it.

In the rear why just the reverse lights if your already pulling the housing? why not replace the turn signals and brake lights while your at it? unless they are led already...

 

[HisMajestyKingTitan]

In the rear why just the reverse lights if your already pulling the housing? why not replace the turn signals and brake lights while your at it? unless they are led already...

I just haven't decided on brake lights. I have three in my cart trying to compare.

Might do these...

https://www.amazon.com/gp/aw/d/B00PHUMFEW/ref=ox_sc_saved_image_1?ie=UTF8&psc=1&smid=A126Q4T86JLNL


The turn signals I won't do because I don't want to mess with putting a resistor inline to slow the rapid blink.

But, taking the tail light off takes 1.5 mins, so I can mess with it at a later time.

 

[HisMajestyKingTitan]

sweet. just told my wife i wanted these lights for my bday coming up. The one that drive me crazy is the freaking tailgate light. lets throw leds in the bed and above but leave lame lights in the tailgate. looks so freaking lame

That was the first thing I did. I agree. All white lights and than bam...Yellow tail gate light. Didn't make sense

 

[TITANUP2017]

I just haven't decided on brake lights. I have three in my cart trying to compare.

Might do these...

https://www.amazon.com/gp/aw/d/B00PHUMFEW/ref=ox_sc_saved_image_1?ie=UTF8&psc=1&smid=A126Q4T86JLNL


The turn signals I won't do because I don't want to mess with putting a resistor inline to slow the rapid blink.

But, taking the tail light off takes 1.5 mins, so I can mess with it at a later time.

good point. I didn't realize about the rapid blink. I wonder how fast it actually is. Just trying to decide if it looks better or worse.

 

[HisMajestyKingTitan]

good point. I didn't realize about the rapid blink. I wonder how fast it actually is. Just trying to decide if it looks better or worse.

It may not rapid blink. Depends on how Nissan wired them.

You should grab a set and confirm?

 

[TITANUP2017]

I just haven't decided on brake lights. I have three in my cart trying to compare.

Might do these...

https://www.amazon.com/gp/aw/d/B00PHUMFEW/ref=ox_sc_saved_image_1?ie=UTF8&psc=1&smid=A126Q4T86JLNL


The turn signals I won't do because I don't want to mess with putting a resistor inline to slow the rapid blink.

But, taking the tail light off takes 1.5 mins, so I can mess with it at a later time.

FYI - These flashers are a direct plug-in that eliminate the need for resistors, therefore not having to mess with stock wiring while allowing turn signals to flash at normal rate.
https://www.superbrightleds.com/moreinfo/flashers-load-resistors/cf18-08-led-bulb-electronic-flasher/786/840/#/tab/Reviews

 

[Blk-Titan]

How did you get the Map light covers off without breaking them?

 

[HisMajestyKingTitan]

How did you get the Map light covers off without breaking them?

The clips are to the inside/center of the map lights. NOT the out side (edge that faces the windows)

Place a flat blade (preferably a plastic trim tool) on the INSIDE edge and put minor pressure on the clear light housing and the clips will pop out.

Very easy.

 

[santis00]

Once you get one the rest are super easy. The first one you worry about breaking then when you see how easy it is you have no issues