[Mr Bojangles]

Hello all.. I'm new to the titan and the titan forums and loving both so far. I just purchased a used 04 Xcab, silver, v8, off road and endurance package.. Very powerful truck.. I'm wanting to do some upgrades and avoid paying the ridiculous prices around town. I figured you guys may have some used parts you're wanting to get rid of. I will continue to keep my eyes on the for sale forum but here are a few things i'm looking for. Billet grill inserts (4 piece), a new bug shield, 2-2.5" lift on the front and i guess about an inch or so in the back, and the hyper white bulbs for the fog and headlights.

Also not only am I looking for used parts, but reliable internet sources to buy new parts from at fair prices. I know there are some places you just don't buy from and i'd rather not learn that the hard way. Also I do car audio so i'll be glad to answer any audio related questions or give advice on where and where not to buy. Thanks for any help help guys!

 

[WhiteNite]

Welcome to TT, check out our list of vendors at the bottom of the forums page.

 

[jasonmotox]

I happen to have a bran new PRG leveling kit for 2wd Titan. List price is $179 I'll sell it for $100 plus shipping. The kit includes the billet spacers for the front coils and bump stops.
PM if your interested, or if anybody else is by the way?
I also have 3" blocks and u-bolts for the rear as well as some Pro-comp shocks. Someone looking to lift their truck 6" could use these.

 

[Mr Bojangles]

I happen to have a bran new PRG leveling kit for 2wd Titan. List price is $179 I'll sell it for $100 plus shipping. The kit includes the billet spacers for the front coils and bump stops.
PM if your interested, or if anybody else is by the way?
I also have 3" blocks and u-bolts for the rear as well as some Pro-comp shocks. Someone looking to lift their truck 6" could use these.

I'd like to get the leveling kit but i also wanted to pick the back up another inch to keep it just a little higher than the front. Don't happen to have 1" blocks and ubolts laying around? or know where i could find a cheap pair?

 

[WhiteNite]

I'd like to get the leveling kit but i also wanted to pick the back up another inch to keep it just a little higher than the front. Don't happen to have 1" blocks and ubolts laying around? or know where i could find a cheap pair?

just add a helper leaf to the back.

 

[Mr Bojangles]

just add a helper leaf to the back.

Does anyone have one or where is a cheaper place to find one?

 

[jasonmotox]

I'd like to get the leveling kit but i also wanted to pick the back up another inch to keep it just a little higher than the front. Don't happen to have 1" blocks and ubolts laying around? or know where i could find a cheap pair?

you could try PRG, not sure how much tho? go to PRGproducts.com
I have u-bolts as well, you'd just have to cut off the excess.

 

[jasonmotox]

rear block kit is $89 from PRG

 

[jasonmotox]

not trying to talk you outta the rear block but, it does suck that the bed holds so much water because of the factory rake. most opinions on here agree the raked look is out, but everyone is entitled to go against the grain?

 

[WhiteNite]

not trying to talk you outta the rear block but, it does suck that the bed holds so much water because of the factory rake. most opinions on here agree the raked look is out, but everyone is entitled to go against the grain?

I agree.

Hey motox, that is a pic of you.

 

[jasonmotox]

I agree.

Hey motox, that is a pic of you.

not bad huh? crazy what you can do on the net nowadays

 

[Mr Bojangles]

rear block kit is $89 from PRG

Yea thats a little steep just for 1" blocks.. I can probably get some cheaper from a local place. If you know where any 1" blocks are for cheap i'll give you $145 for the leveling kit, blocks and u-bolts for the back

 

[jasonmotox]

Yea thats a little steep just for 1" blocks.. I can probably get some cheaper from a local place. You said you had the u-bolts but not the blocks?

these are billet aluminum blocks, so much better than cast steel. I have a set of U-bolts made for 3" blocks (which I have to sell as well) they are longer than you need but could be cut down with a sawzall.

 

[Mr Bojangles]

these are billet aluminum blocks, so much better than cast steel. I have a set of U-bolts made for 3" blocks (which I have to sell as well) they are longer than you need but could be cut down with a sawzall.

Yea i can do that no problem.. If you know of anyone or can come up with 1" blocks I'll get everything for $145. I understand these blocks are aluminum and don't sell cheap but do they just last longer or are they just more quiet or what?

 

[jasonmotox]

Yea i can do that no problem.. If you know of anyone or can come up with 1" blocks I'll get everything for $145. I understand these blocks are aluminum and don't sell cheap but do they just last longer or are they just more quiet or what?

you want the spacers? you can always add the 1" block later. I'm pretty sure that you won't be completely level without the 1" blocks. You should still have about 1" of rake. Call Greg at PRG and he can let you know for sure. If you cant get ahold of him there are alot of threads on here about the level kits.
Put it this way.. I added a 4" spindle lift to the front and had to use a 1" block in the rear to get it close to level. The spacers lift the front 2 1/2" so go measure your truck and see what kind of height diff you'd have if you added the spacers.
The billet blocks dont rust and they dont crack like the cast ones do.

 

[jasonmotox]

want...the...spacers?? $80 off the going price, thats pretty good if ya ask me.

 

[Mr Bojangles]

want...the...spacers?? $80 off the going price, thats pretty good if ya ask me.

PM sent. 1

 

[Mr Bojangles]

still taking suggestions guys

 

[Mr Bojangles]

and actually more focused on getting the 4 piece billet inserts now.. I've been looking around but i don't wanna get a real cheap one thats not gonna last long. I'm looking to spend around $100 so if anyone knows anything in that area let me know. Thanks

 

[jasonmotox]

and actually more focused on getting the 4 piece billet inserts now.. I've been looking around but i don't wanna get a real cheap one thats not gonna last long. I'm looking to spend around $100 so if anyone knows anything in that area let me know. Thanks

billet smillet! get the spacers they will change the stance and look way better than billet grill fad that is quickly fading away.
besides I need your $100 to go towards my step rails!:upsidedow