Nissan Titan Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
2,682 Posts
Discussion Starter #1
I have a great mechanic and he did the install for me and the alignment for $180. He said that is alignment system was not updated for 08 specs so he used 06-07 specs. he didnt know if they were the same so he asked me to find out. The only concern he had was it "looked" to still have some camber, he didnt adjust the camber because he didnt have the specs. what do i need to tell him to fix this problem or is it ok? thanks
 

·
Registered
Joined
·
1,586 Posts
Specs??? Make the wheels straight no specs!! Look and see if you even have camper bolts to align. 05-06 1/2 didnt like me and i had to buy some
 

·
Registered
Joined
·
1,586 Posts
BIGDADDY"S-07-CREW said:
Do the 07's have the bolts?
They went back to adjustable ones. On the lower A arm there should be a bolt with notches for different degrees. looks like a washer mounted to the bold that is off center. Mine was just a simple bolt. $97 from nissan for new ones :(
 

·
Registered
Joined
·
6,053 Posts

·
Registered
Joined
·
6,373 Posts
he didnt adjust the camber because he didnt have the specs. what do i need to tell him to fix this problem or is it ok? thanks
What?...What would he do if his dog ate the specs?
0-1/4 neg camber...
Does he torque the oil pan drain plug also?....

Lame....
 
1 - 6 of 6 Posts
Top