Nissan Titan Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
341 Posts
Discussion Starter #1
Went outside and notice the fog lights where druppy... i took a closer look and it seems like the lens is not completly attached to the casing... is that broken/loose/or unclipped? the whole casing seems kinda loose.. are those pressure clips behind there?
 

·
Registered
Joined
·
605 Posts
I just put OEM fogs on my '08 SE that didn't come with them 2 nights ago. There are two plastic bits you insert into the bumper in the foglight cavity, then the back of the foglight housing has studs that press/snap into the white bits and holds it in place. In addition to the two plastic studs, there is a metal treaded stud as well. Once in place you take a nut and tighten it to the stud to hold everything in place. If you lay on your back and look up at the back of the bumper ends you'll see what I mean.
 
1 - 2 of 2 Posts
Top