pics

inlet and outlet

 

That is the built in X pipe....... Performance for sure!!!! You will like it. I am running my own X pipe infront of Dual 14" Maggys and the Butt dyno feels a HUGE difference over the H pipe I had on there before. Enjoy!!! BTW....One drawback is the CIS (card in spoke) sound that you get at WOT revs..... Other than that THE MUFFLER FOR THESE TRUCKS!!!!!!

Later


My 14"ers are straight thru...........

 

Who did your exhaust?

 

Yeah I confirmed with Toomnymods that this is the same muffler he has an ran 12's, so I should be good. I actually got this muffler to clean up the sound of my raspy/poppy exhaust....Toomnymods (who replaced his JBA muffler for this exact muffler) said that it sounds amazing. The 22" apparently has the least amount of CIS sound..We shall see. Friggin thing is huge and heavy LOL

 

I got my magnaflow waiting to go on after jwt is done testing with my T.

 

Are you having that installed or are you doing it yourself? I just got mine because it was a "direct fit" so I thought I could just cut my old one off and clamp the new one on. I didn't realize that the 2 incoming pipes were a different distance apart.

 

dude the maggy 14" is where its at . haha jk it would probably be insanely loud with your setup!

 

That is called a split core design. It is mainly to help control sound levels more vs the standard core mufflers by directing the sound more into the packing material. It will not hurt performance at all and should have a very deep, mellow tone to it.

 

I doubt it will sound anywhere near OEM with my set-up, or I will send oyu $100 LOL.....I'm willing to live with it because my exhaust sounds so crappy right now, that I need something to smooth it out. The fact that Toomny used it and runs 12's, and Toughtitan says its good (along with a few others) makes me feel a little better about it...these guys know more about exhaust then I do....Its just something I'll have to live with (the possibility of a small restriction) in order to have it sound decent, otherwise its like running straight pipes

 

mine is the same but its the 18 inch magnaflow muffler once i get cams im swapping out to the borla XR-1

 

Mine is like a straight through, and I thought I had the 18??? Of course, I got it 5.5 yrs ago.....maybe they changed it?

 

I've been running the Magnaflow for 4 years now. I love it. I just did a shift kit(while having the tranny rebuilt) and the Bully Dog Triple Dog GT, what a freakin different. I feel sorry for mustangs now. That Bully Dog on extreme will smoke the living ish out of those 37's.

Oh, and did I mention how good the Magnaflow sounds....

 

got my 22" welded on today. Sounds awesome. Its quieter, but still has plenty of growl. Sounded much quieter on start-up, but when I got on it, it got louder. Its a much smoother/cleaner sound, I am very happy with it

 

Wait until it breaks in. Takes about 1-2 weeks for it to finish up. That is the sound it will have until you decide to change it up again or get rid of the truck.....lol. Congrats BTW.

 

cool glad you like it i am patiently waiting for my 18" maggy to get here so i can get it on.

 

I have the 18" and would almost rather run open exhaust due to the horrible CIS sound at throttle. Let me know if that 22" makes enough difference. I hate the MF sound right now and am thinking FM

 

Nah the 22" doesn't do it, at least I haven't noticed it...I got it because I heard it doesn't do the CIS much

 

It's official, this muffler rocks! Drone is cut down by 1/2. I did the ultimate test LOL, I got on it next to big wall, and is sounded deep and smooth, no CIS sound that I could hear...I'm 100% happy with this thing. Truck felt like it pulled harder, but we all know how the butt dyno is LOL

 

Hi O-FiveCC!

I'm glad everything worked out and you're enjoying the sound!!! The internal split won't effect performance at all, it's still straight through. It will and as you now know control the tone quality much better!!!!

Please feel free to call, email or PM me anytime with questions!!! We appreciate your business and have a great day!

Kind regards,

 

how loud is it when you get on it?

 

I would say about mid level loud. You have to understand, my exhaust has been loud for a while, so this is a welcome change. It's a good mix of hearing the motor and the exhaust, its a low growl, but its their just cleaner. About 60-70% as loud as my last exhaust. When I'm cruising at 50-55MPH, I can barely even hear it

 

sweet i will have to keep this muffler in mind for sure, glad you like it.

 

Told you you'd like the Maggy sound/performance!! One of these days you guys will listen to me







j/k HAHA!! Awesome news buddy!!

 

Well, I originally got the idea a while back because Toomnymods swapped his JBA muffler out for a 22" Magnaflow and loved it

 

When U going to the track again 0-fiveCC?

 

I tried to go Wednesday, but they were closed because it was too cold. I will be heading out Sunday, for Funday Sunday

 

To cold = big hp!

 

Yeah i know, I ran in a -700 DA last year and it was 50...This Funday Sunday, the high is going to be 50, and we start running at 10am, so we will be running while it is in the 40's. They said they will be open Sunday, so lets hope so, so I can get a 13.7 before I start adding my mods on

 

so is the reasoning behind the 22" not having that CIS sound because of the internal split?

 

It's a combination of the muffler being larger (more area for sound dissipation) and the internal split allowing more area for the sound to be controlled. The 22" is 5x11" and the 18" is 5x8". We've had great luck with this muffler on the Titan. Please feel free to call, email or PM me anytime with questions.

Kind regards,

 

I think bj2007 has a split flow 18"

 

If your talking about replacing the muffler on a 07+ you need to cut the inside stock pipe and turn it 180 degrees. Watch this video and you see what I mean

Magnaflow 22" Muffler video by NoFishNick - Photobucket

 

I wonder if I could get away with doing the same and just using muffler clamps. I'm not much of a welder . . . at all, haha. Althought, I'm sure I'll have to do something about the hanger. Thanks.