Manifold Nuts and Studs

7562 Views 4 Replies 4 Participants Last post by all torque, May 15, 2017

Rage232

Discussion Starter · May 13, 2017

Hey Guys - pulled the trigger on the Cajun manifold fix tonight.... I would like to have a few spare head studs also like to get all new nuts. I need to order these online as I don't have a dealer anywhere near me. Found this site here:
https://www.nissanpartsdeal.com/parts-list/2006-nissan-titan/manifold.html

Im getting 20 replacement nuts (14004B package of 10) and 10 replacement studs just in case (14004A package of 10)

I already have the 2 manifold gaskets and 4 b pipe gaskets

Is there anything else I should get from this nissanpartsdeal.com before I check out? I'd prefer not to pay shipping twice

I'm also grabbing an intake to get the most out of the exhaust:
https://www.amazon.com/gp/product/B006YGEQIG/ref=ox_sc_act_title_1?ie=UTF8&psc=1&smid=A3JT2X579V8W2

Let me know what you think... Thanks!!

Save

Reactions: 1

1 - 2 of 5 Posts

all torque

· #2 · May 14, 2017

I just did mine today. I replaced all of the nuts and 8 of the studs. I had only planned to remove 8, 4 on each side but ended up taking all of them off. Luckily, they weren't beat up and I was able to reuse them. Make sure you have the Nissan (OEM) gaskets, all others will fail, to include the ones that come with the JBA headers. You don't want to do this twice. Have fun and take your time.

Sent from my SM-G930V using Tapatalk

Black 07 CC SE 4x4
Suspension-Bilstein 5100s w/08 HD coils, Rough Country 4", PRG UCA, Ext end links, & tie rods, 5100s in the rear, Hellwig Helper Springs, RC Traction bars (not installed yet) Performance-Stillen Radiator, Transgo Shift Kit, UpRev, Nismo CAI, JBA LT's & Cat Back, Cajun Bpipes, UltraQuiet Res, True Trac, 3.36 gears, Frozenrotors Big Brake kit, T/B Bypass, Burnout & Air Vent Mod, ScanguageII, Moto Metal 0970's(Black), Toyo RTs 35x12.5-20, Optima YT**Cosmetic- BT Mirrors, Custom Offstes 1.25" Wheel Spacers, RetroSolutions LEDs, Katzkin, CalTrend seat covers, WeatherTechs, GrillCraft MX srs, UWS Tool Box(Black), Autodimming mirror w/temp and compass display, 20% Tint all around, Pinch Weld mod, Autometer Tranny Temp Gauge, Fog Light mod, Sylvania 6"LEDs, Harley sticker!
*16 HD SGS-Some Mods *05 HD Nightrain-Lots of mods *04 Raptor-Too many mods to list

Save

Reactions: 1

all torque

· #5 · May 15, 2017

SDHARLEYDAD said:
how are you getting past Calif. Smog rules?...I thought the JBAs aren't C.A.R.B.

My truck is registered in Texas and I'm moving to Florida this summer.

Sent from my SM-G930V using Tapatalk

Save

1 - 2 of 5 Posts

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.

Top Contributors this Month