Nissan Titan Forum banner

Max Electrical load on the reverse/backup light circuit on the trailer plug harness

899 Views 3 Replies 3 Participants Last post by  cj_rezz
Does any one know what the Max Electrical load on the reverse/backup light circuit on the trailer plug harness is of a 2010 Titan?

I want to install 4 24watt LED flood lamps on my travel trailer and 2 in the back of the truck. This would add up to a little less than 10amps. Can this circuit handle this?

Sent from my LG-D852 using Tapatalk
1 - 2 of 4 Posts
Thanks for your replies guys.

So what if I put 4 18w led flood lights on the trailer off the trailer plug. 18w*4/12=6A. Or even 4 24w lights would still only be 18w*4/12=8A. Then ran 2 LED flood lights on the rear bumper of the truck directly off the battery and controlled by a relay off the trailer harness?

Sent from my LG-D852 using Tapatalk
1 - 2 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top