Nissan Titan Forum banner

More Rubbing After UCA Install?

785 Views 5 Replies 3 Participants Last post by  SouthernLion
So I had my Dirt King heimed UCA's installed and an alignment done. Ride is excellent now. I'm very happy not to hear the clunk when I go over a large bump. Really feel like I almost ride even a little smoother than before.

The only downside it seems is that for some reason, I now rub more in the rear when turning. Instead of only lightly rubbing at full lock, I rub when only turning about 3/4 of the way.

Can't figure out why that would be the case. No extra height was added. Any ideas? I have not done the PWM. Didn't need to before the new UCA's.
1 - 2 of 6 Posts
not sure if caster or something was changed with the UCA's. hopefully Nick will chime in. I know on Tundras you can adjust the tires front or back with aftermarket uppers, not sure on titans though.
Ask the shop if they can adjust them so it pushes the tires forward.
1 - 2 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.