i am also running 6" rcx lift with 35" toyo mt on factory 17 OR rims. I cannot change gears without the frnt. where can i can find a good priced ring and pinion 3.36
Need new ring and pinion
i have a 2004 4X4 off road king cab that i am rebuilding the rear end on. I ordered a detroit truetrac 913a582 for the rear end along with races and bearings. Shop said my ring and pinion is damaged and will also need to be replaced. I understand i cannot upgrade the rear gears to 3.73 something about the front has to turn same speed as the rear??
where/what can i get one of these ring and pinion? should i stick with the 3.36 gears just to be safe?
can i upgrade the rear gears without doing the front and retain 4x4?
where/what can i get one of these ring and pinion? should i stick with the 3.36 gears just to be safe?
can i upgrade the rear gears without doing the front and retain 4x4?
1 - 2 of 3 Posts
1 - 2 of 3 Posts
- This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Nissan Titan Forum
Nissan Titan Talk Forum is a community for truck owners to discuss the Titan Cummins, Warrior, Midnight Edition and more!
Full Forum Listing
