Need Your Help with Rear setup

LDUBS06TITAN

Discussion Starter · #1 · Feb 4, 2011

520 2

I just recently lowered my 2006 2wd Titan and supposedly a 2/5" drop but i'm pretty sure is not a true 2/5".

My Setup

Front:
Belltech drop struts.
Factory springs (2WD).
Drop spindles soon when I have $$$$ hahaha

Rear:
3" de-arched (factory leafs spring).
2" drop shackles by (Suspension Max)
Belltech Street Performance Shocks.
Quarter inch off the bump stops.

Need Your help.....I'm pretty much riding on bump stops and she bottoms out. I think the de-arched leafs settled. What other options I could go with...........I seen someone else did the 4" belltech leaf pack and flip it and went with the 1.5 drop block from PRG.

Please let me know what you think or if you have any good ideas. I dont haul anything so just looking for more travel....

Thanks again for your help!

1 - 3 of 3 Posts

bestatchess

· Premium Member

Joined Feb 8, 2004

·

17,244 Posts

#2 · Feb 4, 2011

PRG says you can't drop 2" with shackles. I tend to believe him.

PrerunnerGreg said:
Ive said it before and ill say it again, you will needa 4.2" LONGER shackle than stock to get a 2" drop in the rear. Im am by no means trying to sell my own product compared to an inexpensive shackle, i just people to know what they are actually buying. Its a 2" longer shackle that will lower the rear by about 7/8".

LDUBS06TITAN

· Registered

Joined Jun 10, 2010

·

14 Posts

Discussion Starter · #3 · Feb 4, 2011

Thanks Best

1 - 3 of 3 Posts

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.