There is a fuse for it under the dash somewhere.
Check in some of those threads listed at the bottom of this page.
Check in some of those threads listed at the bottom of this page.
No power at my electric brake harness
Help anyone. I just installed my factory jumper harness to my 2010 Titan and should have continuous power to the Prodigy P2. I have no power coming to the harness at the connection block. All relays are installed from the factory and all fuses I could find and see are good. Am I missing something or do I have a defective harness.
1 - 4 of 4 Posts
What was the solution to this issue. I'm having the same issue right now.
All the relays and fuses are installed.
2008 LE w/ big tow
All the relays and fuses are installed.
2008 LE w/ big tow
Check this thread. It may help. http://www.titantalk.com/forums/titan-towing-hauling/61201-electric-brakes-no-power.html
1 - 4 of 4 Posts
- This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Nissan Titan Forum
Nissan Titan Talk Forum is a community for truck owners to discuss the Titan Cummins, Warrior, Midnight Edition and more!
Full Forum Listing
