Nissan Titan Forum banner

1 - 20 of 3662 Posts

·
Registered
Joined
·
94 Posts
lawton/ FT.Sill til may
 

·
Registered
Joined
·
214 Posts
NW Oklahoma. Near kingfisher
 

·
Registered
Joined
·
16 Posts
Discussion Starter #9
Where do you guys get stuff for truck? Anything around or in Tulsa that stocks anything? And has anyone put the level kit on their trucks? Any tips would be great. Thanks
 

·
Registered
Joined
·
9,147 Posts
Where do you guys get stuff for truck? Anything around or in Tulsa that stocks anything? And has anyone put the level kit on their trucks? Any tips would be great. Thanks
Honestly, these forums are the best place to buy our stuff. Locals don't stock much for Nissan trucks and then there's sales tax when they do. It's usually quite a bit less to just pay for shipping from a site sponsor.

PRG is what I had before putting the ProComp on. IMHO, Greg is GREAT to deal with:

PRG Products


NCD is the cheapest I've seen. You just have to pickup some bumpstops from somewhere like Autozone or Sam's Offroad:

Leveling Kits

http://www.samsoffroad.com/


Here's a write-up, it's a pretty easy install:

How To install PRG Mini-Lift - Nissan Armada Forum: Armada & Infiniti QX56 Forums
 

·
Registered
Joined
·
59 Posts
Pops helped me install new shocks and a leveling kit. If you have a 2wd, a leveling kit makes your truck look A LOT better.
 

·
Registered
Joined
·
693 Posts
I live in Durant, about 15 minutes from lake texoma.
 

·
Registered
Joined
·
93 Posts
Pops helped me install new shocks and a leveling kit. If you have a 2wd, a leveling kit makes your truck look A LOT better.
Hey VolcmStar I help you install new shocks and a leveling kit, I just leave right around the corner, just send me a pm.
 

·
Registered
Joined
·
16 Posts
Discussion Starter #15
Well I got the NCD 2" level kit ordered. Hopefully it's here this week. Pops, did you install your ProComp? I'm thinking about getting one in a few months. Im gonna order rims and tires soon too. I like the MotoMetal 951, with some 33" nitto mud grapplers. Does anyone no if this will rub with the 2" level kit? If it does wi the pinch weld mod take care of it? On another subject does anyone duck hunt around here? I know I ask alot of questions. Thanks for all the help.
 

·
Registered
Joined
·
9,147 Posts
Well I got the NCD 2" level kit ordered. Hopefully it's here this week. Pops, did you install your ProComp? I'm thinking about getting one in a few months. Im gonna order rims and tires soon too. I like the MotoMetal 951, with some 33" nitto mud grapplers. Does anyone no if this will rub with the 2" level kit? If it does wi the pinch weld mod take care of it? On another subject does anyone duck hunt around here? I know I ask alot of questions. Thanks for all the help.
I started installing my ProComp but stopped because of the time it was taking. It took me about 4-hrs to get to the point of dropping the front diff. On the Armada, the rear is as intense as the front so I was worried that I might not get it done before Monday so I stopped at that point and took it into Custom Offroad. It took them a day for the front and a day for the rear.

The Titan is different. It takes a good part of a day for the front but the rear is much, much easier and can be done within a couple hours. So I'm guessing a Titan might be able to be done in about 9-12hrs.

You cannot stack a spacer on top of the ProComp spacer, it's a huge liability and voids the warranties. Instead, you get some SAW's or Radflos from PRG and adjust them for any additional lift that you want to add.

Those Mud Grapplers should fit fine and the pinchweld mod is easy enough to do if necessary.
 
1 - 20 of 3662 Posts
Top