Nissan Titan Forum banner

One more Exhaust Question

677 Views 5 Replies 5 Participants Last post by  Leadsled124
I have read several threads, and just want a quick answer....I have a 2008 SE CC 4X4, I want to put the Magnaflow 12280 muffler and a 4" tip on my truck with the rest of the system being stock,can I do this without loosing any performance?
1 - 6 of 6 Posts
you will not lose performance, but you probably won't gain anything but a little sound out of it...
I believe that you WOULD gain some performance. The magna flow will outflow ANY stock application because of its straight thru design. I think you will gain enough to feel it in the "butt dyno". Don't forget if you let more out, you can let more in. Even if its only a drop-in K&N, coupled with a mufflet might net you 9-14 horses.
If it is just the tip, it will not hurt performance. Now if it was 4 inch from the muffler to the bumper, than it would hurt performance.
Thanks for the input....Probably will go with a 3" or 3.5" tip instead..
GREAT08 said:
Thanks for the input....Probably will go with a 3" or 3.5" tip instead..
Just weld it up high and at an angle so you cant see when it goes fromsub 3" to 4" or what ever. I hate it when diesels try and put a 6" tip on a 3 1/2" pipe. who they think there foolin. looks like a bandaid. banks does this
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top