[TITANUP2017]

I did not go with the brightest ones as I don't particularly like being blinded nor do I care to be seen by everyone on road. These are super bright white as-is and match the rear bed lights and running board lights nicely.

Bought here (Same application as Titan XD):

You will need a total of (4) - 2 front / 2 rear

https://www.superbrightleds.com/moreinfo/festoon/de3175-led-bulb-4-smd-led-festoon-30mm-car/2107/

 

[Blk-Titan]

I did not go with the brightest ones as I don't particularly like being blinded nor do I care to be seen by everyone on road. These are super bright white as-is and match the rear bed lights and running board lights nicely.

Bought here (Same application as Titan XD):

You will need a total of (4) - 2 front / 2 rear

https://www.superbrightleds.com/moreinfo/festoon/de3175-led-bulb-4-smd-led-festoon-30mm-car/2107/

BTW....what is the best way to get the covers off to replace the bulbs?

 

[TITANUP2017]

BTW....what is the best way to get the covers off to replace the bulbs?

I used the thickest credit card I had. There are YouTube vids on this as well.

 

[Blk-Titan]

I used the thickest credit card I had. There are YouTube vids on this as well.

Thanks Bud!

 

[mmorgan]

I used the thickest credit card I had. There are YouTube vids on this as well.

Thanks Bud!

I did mine also. It is easiest by prying on the “hinged” part of the cover on front and back side. I did mine with a micro screwdriver with no damage. Lights are 31mm festoons for anybody in the future that sees this thread

 

[admire]

When you press the lights individually (with the door closed) or throw the switch, do they still come on or did you need resistors?

 

[mmorgan]

When you press the lights individually (with the door closed) or throw the switch, do they still come on or did you need resistors?

Mine don’t have resistors and they function normally, by switch, door, and individual press. I bought a 10pk off of Amazon for $5. I’ve had them for about a week with no issues.

 

[LeaninBack916]

Went to replace them and the rear switch just came flying off in my crew cab. Now, none of the interior lights works. Not sure if it was held up with glue or what but going in to see whats going on. The glue that looks like it holds the rear switch came off and none of the cabin lights work anymore.

 

[LeaninBack916]

Went to replace them and the rear switch just came flying off in my crew cab. Now, none of the interior lights works. Not sure if it was held up with glue or what but going in to see whats going on. The glue that looks like it holds the rear switch came off and none of the cabin lights work anymore.

Just dropped it off today to see whats going on. Put back in the original lights... Gonna find out why the map lights dont work. Assuming a relay or something behind the scenes?

 

[LeaninBack916]

Went to replace them and the rear switch just came flying off in my crew cab. Now, none of the interior lights works. Not sure if it was held up with glue or what but going in to see whats going on. The glue that looks like it holds the rear switch came off and none of the cabin lights work anymore.

Just dropped it off today to see whats going on. Put back in the original lights... Gonna find out why the map lights dont work. Assuming a relay or something behind the scenes?

Fuse #8 replaced from the warranty sheet. Then promptly installed the LED white ones when I got home. All is working well now.

 

[Xcylon]

I did not go with the brightest ones as I don't particularly like being blinded nor do I care to be seen by everyone on road. These are super bright white as-is and match the rear bed lights and running board lights nicely.

Don't forget the vanity mirrors))

 

[Skincannon]

I just ordered a set from Superbright LED'S today, they have a 15% off sale going until Dec. 13, plus they are cheaper than some others to begin with. I almost bought the fog light bulbs, but I'll see how well these work first.

 

[titanmidnight]

I did not go with the brightest ones as I don't particularly like being blinded nor do I care to be seen by everyone on road. These are super bright white as-is and match the rear bed lights and running board lights nicely.

Don't forget the vanity mirrors))

Is it the same bulb for the vanity mirrors?

 

[Skincannon]

Well, they work great, thanks titanup2017, I also bought the same bulbs. I wouldn't want the brightest ones for sure! I did notice they don't fade much when you shut the doors, but it isn't a big deal. I also bought a set for my wife's car, and got her the brightest one for her rear hatch area. This company has about the best prices, and fast shipping on both sets, plus they don't gouge you on the shipping!

 

[2D78]

BTW....what is the best way to get the covers off to replace the bulbs?

Use a small flathead to lightly pry between the lens and the slide switch. The lens hinges are just snapped onto the housing. Don't pry on the outer edge where you push to turn the map light on there are little plastic hooks that hold that side in and they break easily. ALSO if your dome lights come on when the slide switch is in the on position but don't come on when the doors are open and the switch is in the door position lightly pry the switch itself out (it's just a cover holding the slide in place to make contact) check and make sure there is no melted plastic covering any of the contacts if so just scrape it off with the flathead and bingo you just saved a trip to the dealership

 

[Spaceguy 85]

When you press the lights individually (with the door closed) or throw the switch, do they still come on or did you need resistors?

No resistors are needed. I changed mine out about 2 years ago. Much brighter than the stock bulbs.