[titanle]

I installed all of my led bulbs today and i got some issues now:

1. The left blinker flashes faster even though i installed the load resistor on both sides, the right blinker is normal.

2. My parking lights arent working anymore, I dont know which fuse I need to check.

3. When i turn on the hazards everything flashes normally. When I turn on the left blinker, it goes very fast.

What things do I need to check here?

 

[titanle]

bump.........................

 

[texas_yesca]

you'll need something like this. (add the http before it)cgi.ebay.com/ebaymotors/3-PIN-ELECTRONIC-LED-FLASHER-BLINKER-FIX-1157-3157-7443_W0QQcmdZViewItemQQcategoryZ33713QQihZ018QQitemZ280189814442QQtcZphoto

 

[gksmith]

What kind of load resistors did you use? The same site that has the LED flasher modules had 25W and 50W load resistors.

I want to make this mod too but since I keep seeing so many problems when people change to LED bulbs I haven't done it yet.

 

[titanle]

What kind of load resistors did you use? The same site that has the LED flasher modules had 25W and 50W load resistors.

I want to make this mod too but since I keep seeing so many problems when people change to LED bulbs I haven't done it yet.

i got all my leds from superbrightleds dot com and i also bought 2 load resistors. I think 1 is defective so they have shipped out a new one and i will swap it in once its here.

The problem was that i had a blown tail light fuse, thats y my parking lights werent working. That was the 1 fuse I didnt bother to check bcuz my led tail lights have been working fine for like 8months now. lol

 

[Pollentrix]

Where was the fuse that the tail lights wasn’t working I read the manual and I check the brake lights fuse and is good but I couldn’t see tail lights for parking lights

 

[Pollentrix]

I don’t have now parking lights at night?