[jfarney89]

I'm sure I'm not the only person that's had this problem. When i use the right blinker, indicator flashes fast but the lights do not flash. The lights are good and fuses are good. As far as i can tell the relay is good as well. When I turn the Hazard lights on, left side works normal, but right side still doesn't flash. Any help or advice will be greatly appreciated.

 

[FishnAlaska]

Look to see if your wiring harness is melted above the axle. Your exhaust takes a bend there and is known to rot out and blow hot exhaust fumes on the wiring harness and melt it.

 

[jfarney89]

Thanks for the suggestion. I'll look at it later today if the rain ever stops.

 

[jfarney89]

For an update, i checked the wire harness near the exhaust pipe, no issues found. I used a test light to double check power and ground at the light sockets and all of a sudden the blinker worked for 2 days. then just stopped once again. Does anyone have a picture highlighting the right fuse, relay or fusible link, or any other possible solutions.

 

[4mula1fan]

The sockets themselves have been known to corrode and fail.

 

[jfarney89]

thanks for the suggestion.