Nissan Titan Forum banner

Power steering return line help

1796 Views 3 Replies 3 Participants Last post by  Funky2me
Can anyone identify the return line for me in the reservoir? Im going to have my front end in the air for a brake flush this weekend and I want to flush the 120k power steering fluid. I just need to know which one is the return back to the reservoir.

Thanks

Attachments

See less See more
1 - 4 of 4 Posts
The parts diagram shows it is the one on the bottom.. the other one says it is the cooler inlet line.. I am not sure does not sound right to me.. I was trying to figure out why it comes in at the bottom and bypasses the stupid filter in the reservoir.
Pull the hose off the nipple on the bottom of the reservoir and plug the nipple. Connect your drain line (to waste oil drain catch pan) to the hose you pulled off the nipple.

Attachments

See less See more
Thanks , However, does not look like the reservoir installed at all. On the reservoir on my truck it has a 3/8 or 1/2 line at bottom going into what is probably a cooler and a 2 inch going from pump to reservoir. I assume if I install a inline filter it goes to the cooler with clean fluid so the smaller line gets it that is under the reservoir.. I just cannot find a good routing diagram or anything that verified I am correct in my Assumptions..
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top