Nissan Titan Forum banner
1 - 14 of 14 Posts

· Registered
Z62 QX80
Joined
·
78 Posts
Discussion Starter · #1 · (Edited)
PRG Trans Mount
Brand new, still in the original packing from PRG. I bought it for my armada but the OE trans mount was still intact.
$85 shipped, domestic US.
***SOLD

Rough Country UCAs
These were installed last March, less than 8K miles and have never been off road. I'll be removing them within the next week or so and post actual pics.
$140 + shipping, domestic US.
***SOLD***

Morimoto 5Five D2S Ballast
These are for D2S bulbs only unless you have/buy the adapter from D2S to AMP bulbs. I've had these stored away, probably close to 4 years. They are fully functional (55w) and kept them for a lighting project I ended up never starting.
$55 shipped, domestic US.
***SOLD***
 

· Registered
Joined
·
555 Posts
Interested in the UCAs. I have a 4" spindle lift. Do you know if they'll work for my lift? On their website it says for 2"-3" lift. Doubtful but thought I'd ask anyway.
 

· Registered
Z62 QX80
Joined
·
78 Posts
Discussion Starter · #3 ·
Mars, I only have a 1.5" lift on my armada so I honestly couldn't tell you whether or not the RC UCAs would work with your setup. I'd check the suspension threads or hopefully someone with a similar setup as yours can chime in.
 

· Registered
Joined
·
555 Posts
I forgot to mention that I also have 2" spacers installed so the UCAs should work. Let me confirm and I'll let you know tomorrow. If they'll work for my truck I'll take the UCAs.
 

· Registered
Joined
·
8,304 Posts
if your running your current set up with OEM UCA's you will have more clearance with the RC's, they will work fine.
 

· Registered
Joined
·
555 Posts
if your running your current set up with OEM UCA's you will have more clearance with the RC's, they will work fine.
Thanks for the input, Fishn.

Primo, any idea on what shipping will cost to 90602?
 

· Registered
Z62 QX80
Joined
·
78 Posts
Discussion Starter · #7 ·
Mars, if they'll fit inside a USPS large priority flat rate box, $18.75 according USPS.com. If not, I'll get actual shipping costs (USPS, UPS, Fedex) after removing and measuring them.
 

· Registered
Z62 QX80
Joined
·
78 Posts
Discussion Starter · #10 · (Edited)
Rough Country UCAs.









SOLD.
The passenger side UCA needs a new ball joint (Moog K6540). Otherwise, all the bushings are solid and intact on both arms.
 

· Registered
Joined
·
555 Posts
UCA's coming my way. Thanks, Francis.
 

· Registered
Z62 QX80
Joined
·
78 Posts
Discussion Starter · #12 ·
BUMP.

Still have the PRG Trans Mount Kit (4WD). $85 shipped, domestic US.
 

· Premium Member
Joined
·
67 Posts
Still have the Trans mount?
 
1 - 14 of 14 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top