Nissan Titan Forum banner

PRG Upper Control Arm?

11026 Views 17 Replies 12 Participants Last post by  dut
Maybe someone will know but I had the chance to talk to Greg the other day about my DR install questions and he mentioned that he is going to have some upper control arms available, is that going to be soon? What price? and any pictures?
1 - 18 of 18 Posts
You mean these? They have been available for awhile now:

http://www.titantalk.com/forums/titan-suspension/56173-new-stuff-prg.html?highlight=uppers

PrerunnerGreg said:
Here's a sampling of a few of the products we have available now, but that aren't on our website. Please call for more info on these items.
First is our new upper a-arm. These are chromoly and use FK and Auroa heims and uniballs. The inner spacers are stainless. We will preassembly and adjust them so you can just bolt them in when they arrive. No grinding or fit issues at all. They are designed to be able to compensate for any permanent frame deflection from hard driving with the inner heim adjustment also. They are powedercoated gloss black and will sell for $599 shipped.
See less See more
Sorry if its a stupid question but what makes these better than the TC ones? I see they are made a little different.
Greg's uses a uniball in the Heim joint and TC doean't.
much better geometry on Greg's UCAs.....and improvements in clearance and ability to adjust
Plus the TC's are no longer available.. in fact, I don't think there are any Titan parts available from TC any longer.
how are the PRG arms different from the CST ones?? and if i wanted to swap my out for the PRG ones... what modifications would i have to make??
54warrior said:
Plus the TC's are no longer available.. in fact, I don't think there are any Titan parts available from TC any longer.
Total Chaos is still making the upper arms and rear shackles for the Titan.
what kind of shackles todoes total chaos make.... lift shackles?!!
SOLJAH74 said:
what kind of shackles todoes total chaos make.... lift shackles?!!
Heavy-Duty Lowering Shackles. Drops the rear 3/4".
PRG sells his own design now. 0", -1/2", -1".
I know companies make DROP shackles.... but does anyone make LIFT shackles??
SOLJAH74 said:
I know companies make DROP shackles.... but does anyone make LIFT shackles??
Your question was:
SOLJAH74 said:
what kind of shackles todoes total chaos make.... lift shackles?!!
My answer was they are 3/4" drop. wtf?
SOLJAH74 said:
I know companies make DROP shackles.... but does anyone make LIFT shackles??
I'm not sure a lift shackle is possible...? it would be really short
SOLJAH74 said:
I know companies make DROP shackles.... but does anyone make LIFT shackles??
Cant do it with a tension shackle. You could do a flip and change them to compression shackles and get probably 4 inches.

Similar to this (for round nose chevys)

http://www.offroaddesign.com/catalog/shacklekit.htm
Just ordered prg shackles today
can't wait to road test em.

The prg uca's are next on the list.
The uniball was the clincher for me.
N00b question: Whats the point of aftermarket control arms?

Side question: I do want to get my truck a tad higher withOUT a bodylift... How would I achieve this?
dut said:
N00b question: Whats the point of aftermarket control arms?
More droop.
^ Oh yea, like I need that. :upsidedow
1 - 18 of 18 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top