Has anyone had issues programming their Homelink to open their garage door? I have one of the newer Genie systems that uses the rolling codes. I have tried resetting both the Titan's Homelink and the Genie itself to no avail. Am able to get my wifes Homelink in her Suburban to work with no problems.
1 - 2 of 15 Posts
Got it to work. Thanks all.
Well, I did finally get my Genie opener programmed. Yes, following the manual step by step did the trick. The order is key.
1. First, must program one of the Homelink buttons using one of your rolling code Genie controllers.
2. Second, you must hit the learn button on the Genie main unit in your garage, then within 30 seconds or so, press the Homelink button that you used in step one.
Thats it.
Well, I did finally get my Genie opener programmed. Yes, following the manual step by step did the trick. The order is key.
1. First, must program one of the Homelink buttons using one of your rolling code Genie controllers.
2. Second, you must hit the learn button on the Genie main unit in your garage, then within 30 seconds or so, press the Homelink button that you used in step one.
Thats it.
1 - 2 of 15 Posts
- This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Nissan Titan Forum
Nissan Titan Talk Forum is a community for truck owners to discuss the Titan Cummins, Warrior, Midnight Edition and more!
Full Forum Listing
Recommended Communities
Join now to ask and comment!
