[TAFOYA'STITAN]

can i run a spacer and the 5100s on the middle perch? im ordering now

 

[FishnAlaska]

yes, but you will need some aftermarket Upper control arms, like Dirt King or PRG. The rough country ones won't give you enough clearance to avoid coil bucket contact. I ran them before my DK's and had some minor contact at full droop.

 

[honda250xtitan]

yes, but you will need some aftermarket Upper control arms, like Dirt King or PRG. The rough country ones won't give you enough clearance to avoid coil bucket contact. I ran them before my DK's and had some minor contact at full droop.

even if he only runs a 1.5" and middle perch?

 

[LaxDfns15]

That's 2.5" of lift. He's gonna have quite a bit of contact with the OEM arms. Don't know about Rough Country, but my DK's have plenty of clearance for my 3" lift.

 

[TAFOYA'STITAN]

I might just do the rc uca and trim a little. The DKs are pricey.

 

[FishnAlaska]

I ran RC arms with a 1.5" spacer and the Bilsteins on middle perch. At full droop the RC arms were resting on my coil bucket. Swapped out to my DK's and they clear the coil bucket at full droop