[LSturbointeg]

hey guys! so gotta question for you as you all know my truck is lifted and done and all that was left was my buddy welding the brackets for my CJD Traction bars which we're planning on doing this week. well, i'm cranking down my coilover down from 2.25" to 1" preload again and this time i'm also installing some adjustable shackles set to 2" drop. now my question is should i wait to have the traction bar installed after or will i be fine having it done now or will that just cause geometry issues with the rear dropped 2"? thoughts?

 

[Smccarty3]

I would wait till you drop it 2", but maybe someone else knows more than me. It would seem to me it might not be a huge difference, but may put some unneeded stress on the heims.

 

[honda250xtitan]

If you can, just wait. 2" shouldnt be an issue though. If anything you might need to thread the heims in a bit to make them line up with the front bracket.

 

[LSturbointeg]

Michael from CJD got back to me and said i should be fine. but what i'll do is install the shackles first to be safe and than have the Traction Bars installed. thanks for the input guys!