Nissan Titan Forum banner
1 - 2 of 4 Posts

· Registered
Joined
·
173 Posts
Discussion Starter · #1 ·
I am looking at possibly getting the rough Country 3" lift and 1" inch blocks on my 4x4 CC, I just put 295/70/17 Terra Grapplers on 17x9 Raceline wheels and I am getting some rubbing when turning the tires. I already have a 2" leveling kit on the front and was hoping maybe this would give it just enough to eliminate the rubbing.

Wanting to know if anyone else has run this setup on the T or might have any other suggestions? Would have liked a 4" suspension lift but they don't make one and don't wanna spend $1300 on a 6"
 

· Registered
Joined
·
173 Posts
Discussion Starter · #3 ·
Where is it rubbing? Did you do the PWM yet?
It is rubbing at the back of the fender well when turning. I have not done the PWM. Not sure I want to do any cutting. I have wanted to get a little lift on it but like I said don't really want to do a 6" beside the fact that is $1300.
 
1 - 2 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top