Nissan Titan Forum banner

Skid plate mounting bolts

9515 Views 5 Replies 4 Participants Last post by  dubyam
Christ on a crutch, how fcking hard is it to find a simple bolt size?!?! My Google-Fu fails me today. I got a '10 Pro-4x with the steel skid plate. Somehow I misplaced the FRONT mounting bolts for it. It's an OEM skid plate and there were 4 stainless steel, button-head allen bolts that hold the front of the skid plate on. I figure it's an M12 x XXmm or bigger, but my local hardware store only has M10 bolts.

The local dealer isn't local, and I don't want to make the hour-long drive if I don't have to. Anyone know for certain what size the FOUR FRONT-MOST mounting bolts are? I still have the two little 10mm bolts for the back side.

1 - 1 of 6 Posts
I'm sorry I can't answer that, but I will tell you that I drilled out all of mine and retapped them so I could use 5/16 bolts. They're everywhere and won't snap the heads with a little torque. It probably took me 30 minutes total to do 4.
1 - 1 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.